Description

 FE-30SST Silicon Steel Sheet Iron Loss Tester Magnetic Core Lossmeter

Product Description

FE-30SST Silicon Steel Sheet Iron Loss Meter adopts SCM technique and analog electronics technique, the magnetic circuit of permeameter adopts low loss silicon steel iron core, it is a small tester for measuring the characteristics of silicon steel sheet, met the requirements of tracing the brand of silicon steel sheet.

The design of hardware circuit is according to Chinese industry standard(GB / 3655-2000), through real-time sampling for the secondary induction voltage V and primary exciting current I to compensate air to below 1.0mV. It adopts the wave feedback technology, to ensure that the sinusoidal waveform of magnetic flux, compared with similar products, the measuring data will be more accurate.

 

Instrument features

Panel direct operation, stand-alone can complete the set point of the test
Measurement of loss ratio of single – chip stator chip P1.5 / 50 by open – circuit magnetometer
The closed-loop measurement can lock the magnetic flux Bm test over the total loss
The closed-circuit measurement can be locked by the magnetic flux Hm to test the magnetic induction
Closed magnetic flux meter really made a zero flux compensation
Closed – circuit magnetometer for accurate measurement of oriented, non – oriented silicon steel
The connection computer can perform a variety of curve tests

Software features

The software system supports WinXP / NT / 7 and other mainstream operating systemsThe test process is automatic, no manual operation (only need to put the sample)(B) to determine the magnetic field (H) value, you can also lock the magnetic field (H) to measure the magnetic induction (B) valueReal-time acquisition of waveforms during testing and discontinuation of operation at any timeThe software uses a database file format that supports direct printing and exporting the results to an Excel spreadsheetCan be directly on the data to save, delete, clear and other operationsCan be multi-point measurement, and the data can be set up clusterThrough the multi-point cluster, can display hysteresis loop, magnetization curve, permeability curve and loss curveSupport a variety of models of the printer, the test report can be directly hit  The test report can generate JPG, Bmp file format, and can send a report file via email.

Instrument Parameter

Name	Parameter
Power Supply	220V ±20V/0.5A,50HZ
Output Power	15V/1.5A
Test Frequency	50Hz, 60Hz free choice
Test model	Lock B Measure H and Lock H Measure B values for both modes
Bm setting range	500mT~1900mT
Hm setting range	100A/m~10000A/m
Accuracy rating	PS Accuracy 2.0%, Bm Accuracy 1.0%
Dimension	280mm*90mm*300mm
Demo requirements	Length: more than 100mm, width: 20mm ~ 30mm Thickness: 0.1mm to 0.65mm Requires sample formation, strictly speaking, need to sample the annealing process to trace the national standard.

Basic configuration

 

No.	Name of part	Model	Quantity
1	Test Host	FE-30SST	1
2	Monolithic silicon steel magnetic conductivity meter	FE-30SST	1
3	Cable	Five-core air connector	1
4	Manual CD	FE-30SST	1
5	Two pieces of silicon steel samples (manufacturers testing)	Grade: 470	1

Optional

No.	Name of part	Model
1	Measuring software	FE-2120
2	Test computer	Lenovo brand computer B4500 (subject to contract)
3	Printers	HP laser black and white printer (subject to contract)
4	Open probe	Sample width and length have a certain requirement (20mmX40mm)
5	Third-party approved silicon steel samples (16)	Metrology institutes in Zhejiang Province issued

 

Test Graph: